Concrete Contractors in Albuquerque | M&M Concrete

abqconcrete.com  |  (505) 550-0418  |  Free Estimates — Albuquerque & Central New Mexico

Table of Contents

1. 45+ Years as Concrete Contractors in Albuquerque
2. Case Study — 13,800 Sq Ft Custom Home, North Albuquerque Acres
3. Concrete Services We Provide in Albuquerque
4. What Goes Into a Properly Built Concrete Project
5. Compaction — The Step Most Contractors Skip
6. How M&M Concrete Manages Every Pour
7. Why Albuquerque Soil Requires Local Expertise
8. Full Service — One Call Covers the Entire Project
9. Areas We Serve
10. 2026 Concrete Pricing in Albuquerque
11. Frequently Asked Questions
12. Get a Free Estimate from M&M Concrete

45+ Years as Concrete Contractors in Albuquerque

Experience That Shows Up on the Job

When you search for concrete contractors in Albuquerque, you will find no shortage of options — new crews, low bids, and companies that started last season. However, M&M Concrete has been operating in Albuquerque since the 1970s. That is not a marketing statement. It shows up on the job in ways that matter.

Over 45 years, we have poured concrete in every Albuquerque neighborhood — the Heights, the South Valley, the North Valley, Four Hills, the West Mesa, the Foothills, and North Albuquerque Acres. As a result, we know every soil type this city sits on. Moreover, we have fixed enough failed pours from other contractors to know exactly what goes wrong when corners get cut — and why those shortcuts are so hard to spot until the damage is done.

What Can Go Wrong When You Choose the Wrong Crew

When you hire M&M Concrete, you get rebar — not wire mesh. In addition, you get a written estimate that does not change. Furthermore, you get a crew that has worked your neighborhood’s soil for decades. As a result, you get a company that is still here when you need them. Call (505) 550-0418 for a free estimate.

📖 Further reading: How to Choose a Concrete Contractor in Albuquerque | Concrete Contractors Albuquerque — Consumer Guide

Case Study — 13,800 Sq Ft Custom Home, North Albuquerque Acres

13,800 Total Square Feet	8,000 Sq Ft Heated Slab
3,000 Sq Ft Garage Slabs	2,800 Sq Ft Patios
🔥 Radiant Heat System	1 Crew — Full Scope

The Site — North Albuquerque Acres Granite Terrain

North Albuquerque Acres sits on crushed and pulverized granite — excellent bearing capacity when properly prepared, but demanding excavation work that requires the right equipment. Additionally, the lot had significant grade changes across all three concrete scopes. As a result, drainage planning had to account for the full 13,800-square-foot footprint on a sloped site.

Therefore, we handled all excavation through ABQ Backhoe & Bobcat Services before a single form board went in the ground. The sub-grade was compacted, the grade was verified, and consequently the site was ready before we ordered the first concrete truck.

The Heated Slab — The Most Demanding Residential Pour

A heated foundation slab with a radiant floor system is the most unforgiving residential pour type we do. Specifically, the radiant tubing is embedded in the concrete. Once it cures, it is permanently inaccessible. For example, a tubing puncture during placement, a cold joint from poor sequencing, or a finish that traps moisture — any of these creates a problem the homeowner lives with for the life of the house.

As a result, we coordinated pour timing directly with the mechanical contractor installing the radiant system. The concrete was placed carefully around the tubing, consolidation was managed to avoid tubing displacement, and consequently the surface was steel-troweled to the flatness specification the flooring system required.

Garages and Patios — Same Standards, Different Requirements

The garage slabs required control joint planning before the first truck arrived — because joints placed wrong show up as random field cracks within a few years. Similarly, the patios required drainage slope designed into the forming phase and a stamped finish timed precisely to Albuquerque’s drying conditions. Every pour type has its own requirements. Nevertheless, all three were handled by the same crew, on the same project, to the same standard.

The Result — One Crew, One Company, 13,800 Square Feet

Every square foot of that project was poured to specification. The foundation was flat, the garage slabs drained correctly through the openings, and the patios matched the home’s architectural character. Furthermore, one company handled the excavation and every concrete pour from start to finish. That is what 45 years of experience as concrete contractors in Albuquerque looks like in practice.

📖 Further reading: Concrete Foundations in Albuquerque NM — Complete Guide | Concrete Place & Finish — Albuquerque · Rio Rancho · Santa Fe

Concrete Services We Provide in Albuquerque

From a single driveway replacement in the Heights to a full custom home concrete package in North Albuquerque Acres — M&M Concrete — 45+ years — handles the complete range of concrete work in Albuquerque. Here is the full scope:

🚗 Concrete Driveways

A properly installed concrete driveway in Albuquerque lasts 30 to 50 years. Therefore, we spec every driveway to the correct PSI, thickness, and rebar schedule for the specific soil and vehicle loads. Every driveway gets rebar on chairs — not wire mesh — proper base preparation, control joints, and curing compound applied immediately after finishing. Additionally, we handle full replacements — demo of the old surface, sub-grade rework, and new pour.

📖 Concrete Driveway Installation Guide | Driveway Contractors Albuquerque

🏠 Concrete Foundations

The foundation is the most critical pour on any project — and the one that is hardest to fix if it goes wrong. Consequently, we install monolithic slabs, stem wall foundations, garage slabs, home addition foundations, metal building slabs, and heated slab foundations with radiant floor systems. Furthermore, every foundation is specified for Albuquerque’s soil conditions, frost depth, and load requirements.

📖 Foundations in Albuquerque — Complete Guide | Metal Building & Commercial Foundations

🎨 Stamped & Decorative Concrete

Stamped concrete requires all the same engineering discipline as structural concrete — plus the timing precision to stamp the surface at exactly the right moment in the cure. In addition, we have been doing stamped and decorative concrete in Albuquerque’s summer heat and low humidity for 45 years. As a result, flagstone, Ashlar slate, cobblestone, wood plank, and brick patterns are all within our standard scope.

📖 Stamped Concrete Service Page | Stamped Concrete Contractors Albuquerque

🏡 Concrete Patios

Standard broom finish, exposed aggregate, stamped, and colored patios throughout Albuquerque. Every patio gets drainage slope designed in from the forming phase. Furthermore, the concrete underneath a decorative patio is poured to the same structural standard as any other flatwork — the finish does not come at the expense of the spec.

📖 Concrete Patios Albuquerque & Rio Rancho | Driveways and Patios Guide

Site Work, Demolition & More

🔨 Concrete Demolition & Removal

Old cracked concrete does not improve with patching. Instead, we break it out with our own equipment, haul it off, and start fresh. No subcontractors, no delay between demo and pour. The same company removing the old concrete pours the new one — and no one can blame the sub-grade conditions on anyone else.

📖 Concrete Demolition & Removal | Demolition & Replacement — Full Guide

🧱 Retaining Walls

Poured concrete retaining walls for residential and commercial properties throughout Albuquerque. Drainage is built into the footing excavation phase — not added after the fact. Moreover, every wall is properly engineered for soil pressure, long-term loading, and Albuquerque’s soil conditions.

📖 Retaining Walls Albuquerque

🚜 Excavation & Site Preparation

Great concrete starts with proper site prep. Through ABQ Backhoe & Bobcat Services, we handle all excavation, grading, compaction, demolition, land clearing, and haul-off in-house. As a result, the same company that preps the site pours the concrete on top of it.

📖 Excavation & Dirt Grading Guide | Excavating Contractors Albuquerque & Rio Rancho

🏢 Commercial Concrete

Tilt-up warehouse foundations, commercial parking lots, sidewalk systems, curb and gutter, ADA ramps, and large-scale commercial flatwork throughout Albuquerque, Rio Rancho, and Santa Fe. In short, if it is commercial concrete in central New Mexico, we handle it.

📖 Commercial Concrete Contractors Albuquerque · Rio Rancho · Santa Fe

What Goes Into a Properly Built Concrete Project

Most of what determines whether a concrete project lasts 40 years or fails in four happens before the first truck arrives. Specifically, the decisions made during sub-grade preparation, forming, and rebar placement are invisible once the concrete cures — which is exactly why low-bid contractors cut them.

Rebar — Not Wire Mesh

Every concrete project M&M Concrete pours gets rebar — #4 or #5 depending on the application — set on chairs at mid-depth and tied at intersections. However, wire mesh is a legacy material that almost always ends up sitting at the bottom of the pour rather than mid-depth where it belongs. Consequently, at the bottom of the slab, it controls nothing. For this reason, we stopped using wire mesh decades ago.

Correct Slab Thickness — Every Pour

The difference between a 3.5-inch slab and a 5-inch slab in material cost is modest. However, the difference in performance over 30 years is enormous. Therefore, we pour driveways at 4 to 5 inches minimum — 6 inches for heavy vehicle access. We do not reduce slab thickness to sharpen a bid. The spec is the spec.

Control Joints — Planned Before the Pour

Control joints tell a concrete slab where to crack when shrinkage happens — and concrete always shrinks. As a result, joints placed wrong, or not placed at all, lead to random field cracking across the surface. Consequently, we plan joint locations before any forming begins, tool or cut them at the correct timing window, and never leave a large slab section without proper joint spacing.

Compaction — The Step Most Contractors Skip

A concrete slab is only as good as the ground underneath it. For example, a 5-inch, properly reinforced, 4,000 PSI slab sitting on uncompacted fill will crack and settle. In contrast, a 4-inch residential slab on properly compacted, undisturbed native soil will last for decades. Therefore, the standard we apply on every project is 95% Proctor density across the full slab footprint — verified before any forming begins.

Because of this, M&M Concrete handles all sub-grade preparation in-house through ABQ Backhoe & Bobcat Services. We run our own vibratory rollers and plate compactors, on our own schedule, with our own crew. As a result, we never hand this step off and assume it got done right.

📖 Further reading: Why Quality Site Prep Matters for Every Concrete Project | Bobcat and Backhoe Services in Albuquerque

How M&M Concrete Manages Every Pour

Pour day is where 45 years of experience shows up most clearly. Concrete placement and finishing is time-pressured work — especially in Albuquerque’s climate where the working window is shorter than most of the country. Here is exactly how we manage it:

The Seven-Step Pour Day Sequence

Why Albuquerque Soil Requires Local Expertise

New Mexico’s soil is not uniform across the metro. What works in one Albuquerque neighborhood can fail in another if the contractor does not understand what is under the ground. After 45 years across this region, M&M Concrete knows what to expect before we break ground on any project.

Soil Conditions by Neighborhood

This neighborhood-level knowledge is not something a new contractor or out-of-state company has. Instead, it comes from 45 years of work across this specific market — every soil type, every grade challenge, and every climate condition Albuquerque can produce.

Full Service — One Call Covers the Entire Project

Why One Contractor Makes a Difference

Most concrete contractors in Albuquerque pour concrete. However, if you need the old surface removed first, that is a separate contractor. If the site needs excavating and grading, that is another call. As a result, three or four crews on the same project means three or four schedules to coordinate — and three or four people to blame when something goes wrong between phases.

In contrast, M&M Concrete does not work that way. We own our own backhoes and Bobcats. Therefore, we handle demolition, excavation, grading, compaction, site clearing, trenching, and haul-off — all in-house. The same company that preps the site pours the concrete and finishes the job.

What Full Service Includes on Every Project

One call. One crew. One invoice. After 45 years of working this way, we can tell you it consistently produces better results than coordinating multiple contractors on the same project. See our full service concrete contractor page for complete details.

Areas We Serve — Concrete Contractors in Central New Mexico

M&M Concrete — 45+ years — serves the entire central New Mexico region. Here is where we work most often:

Albuquerque Metro

• Albuquerque — Our home since the 1970s. Every neighborhood, every soil type, every project size. See our Albuquerque consumer guide.
• North Albuquerque Acres & Sandia Foothills — Custom home foundations, large driveways, heated slabs, and decorative patios on granite terrain. Our 13,800 sq ft case study is from this area.
• North Valley, Corrales & Placitas — Rio Grande alluvial soils, drainage-critical projects, agricultural concrete, and custom estate work throughout Sandoval County.
• South Valley & Bosque Farms — Expansive clay expertise, full residential concrete packages, drainage design on every project.
• Heights, Four Hills & Northeast Albuquerque — Caliche-aware estimating, standard residential and commercial concrete throughout the Heights corridors.

Beyond Albuquerque

• Rio Rancho — Sandy soils, caliche, active development. Full concrete services for residential and commercial clients. See our driveways and patios Rio Rancho page.
• Santa Fe — 7,000-foot elevation, freeze-thaw engineered concrete, custom home work for Northern NM. See our Santa Fe concrete contractors post and Santa Fe foundations page.
• Edgewood & East Mountains — Rocky terrain, freeze-thaw conditions, agricultural and residential concrete.
• Los Lunas & Valencia County — Residential and commercial concrete throughout Valencia County.
• Bernalillo & Sandoval County — Full concrete services throughout the north metro.

2026 Concrete Pricing in Albuquerque

Every project is different — but here is a realistic overview of what concrete services cost in the Albuquerque market in 2026. Final pricing depends on soil conditions, site access, project scope, and finish selection.

Pricing Ranges by Service Type

Service	Unit	2026 Range
Concrete driveway — standard	Per sq ft	$6 – $12
Concrete driveway — two car (~600 sq ft)	Per project	$3,600 – $7,200
Concrete patio — broom finish	Per sq ft	$6 – $10
Stamped concrete — single pattern	Per sq ft	$12 – $18
Stamped concrete — flagstone two-tone	Per sq ft	$15 – $22
Residential foundation — monolithic slab	Per project	$7,000 – $20,000
Heated slab — radiant in-floor	Per sq ft	$10 – $18+
Concrete demolition and removal	Per sq ft	$2 – $6
Backhoe / Bobcat — site prep	Per hour	$135 – $175
Debris and concrete haul-off	Per load	$500 – $850

📖 For the most detailed pricing on every service: Concrete Contractor Costs in Albuquerque — Full 2026 Price Guide

Frequently Asked Questions — Concrete Contractors in Albuquerque

About M&M Concrete

How long has M&M Concrete been in business in Albuquerque?

Over 45 years. We started in Albuquerque in the 1970s and have never left. Locally owned and family operated, we have built our reputation one project at a time across this city. Moreover, we are not a franchise, not a national chain, and not a company that showed up after the last construction boom. We were here before it and we will be here after the next one.

What makes M&M Concrete different from other concrete contractors in Albuquerque?

Three things separate us from most Albuquerque concrete contractors. First — local knowledge built over 45 years in this specific market. As a result, we know Albuquerque’s soil conditions by neighborhood before we dig. Second — we own our own excavation equipment. Therefore, our backhoes, Bobcats, and compaction equipment are operated by our own crew — not subcontracted. Third — we do the whole job. Consequently, there is one company, one point of contact, and one company accountable if anything goes wrong. See our guide to choosing a concrete contractor for what to ask any contractor you consider.

Do you use rebar or wire mesh?

Rebar — always. We use #4 or #5 rebar on chairs, tied at intersections, and properly supported through the entire pour. However, wire mesh is a legacy material that almost always ends up at the bottom of the pour. At the bottom of a slab, wire mesh controls cracking in the same way a floor mat controls a car — it doesn’t. As a result, we stopped using wire mesh decades ago. Every project we pour gets rebar instead.

Are you licensed, bonded, and insured in New Mexico?

Yes — always and without exception. We are licensed through the New Mexico Construction Industries Division and additionally carry general liability insurance and workers compensation coverage on every job. We provide proof of all three upon request. Therefore, never hire a concrete contractor in Albuquerque who cannot provide current documentation of all three immediately — the risk to you as a property owner is too significant.

About Our Services & Projects

Do you handle large custom home concrete projects?

Yes. Our 13,800-square-foot North Albuquerque Acres case study in this post shows the kind of project we handle regularly — heated foundation slabs, garage floors, and decorative patios on the same project, managed by one crew. Furthermore, we work with custom home builders, owner-builders, and architects throughout the Albuquerque metro and Santa Fe. If your GC handles site prep, we also work as a place-and-finish crew. See our concrete place and finish guide for how that works.

How much does concrete work cost in Albuquerque?

Standard concrete driveways run $6 to $12 per square foot. Similarly, stamped and decorative concrete runs $12 to $22 per square foot depending on pattern complexity. Residential foundations run $7,000 to $20,000 or more depending on size and type. In addition, heated slabs run $10 to $18 or more per square foot. Concrete demolition and removal runs $2 to $6 per square foot. See our complete 2026 pricing guide for detailed breakdowns on every service.

Do you pour heated concrete slabs for radiant floor heating?

Yes — and this is one of the pour types that demands the most experienced crew. Specifically, the radiant tubing is embedded permanently in the slab. As a result, a tubing puncture during placement is unrepairable without cutting into the finished concrete. Therefore, we coordinate pour timing with the mechanical contractor, manage placement carefully around the tubing, and steel-trowel the surface to the flatness the flooring system requires. We have extensive experience with heated slab installations in Albuquerque’s custom home market.

Do you handle the site prep or just the concrete pour?

Both — and most of our projects involve both. We handle excavation, demolition, grading, and compaction through our in-house ABQ Backhoe & Bobcat Services. However, if your site is already prepped and you need a place-and-finish crew, we do that too. Either way, the concrete is poured by the same experienced crew that has been doing this work in Albuquerque for 45 years.

Do you handle commercial concrete work?

Yes. Commercial parking lots, tilt-up warehouse foundations, sidewalk systems, curb and gutter, and ADA ramps are a core part of our work. In fact, see our commercial concrete contractors guide — including a 150,000 sq ft tilt-up warehouse case study — for the full scope of our commercial capabilities.

How do I get a free estimate from M&M Concrete?

Call us at (505) 550-0418 or request an estimate online at abqconcrete.com/contact. We come to your site, assess the soil and conditions, walk through your project requirements, and give you a written quote with a specific number. In short, no pressure, no bait-and-switch, no verbal quote that changes after the demo is done — just an honest estimate from a contractor who has been doing this in Albuquerque for 45 years.

Get a Free Estimate from Albuquerque’s Concrete Contractors

Why the Contractor You Choose Matters

Concrete is permanent. Therefore, the contractor you choose today determines what you live with for the next 30 to 50 years. A properly installed concrete driveway, foundation, or patio in Albuquerque lasts generations. However, a poorly installed one starts failing within a few years — and fixing it means tearing it out and doing it right the second time at full cost.

As a result, M&M Concrete has been doing it right the first time in Albuquerque since the 1970s. From a simple driveway replacement in the Heights to a 13,800-square-foot custom home foundation in North Albuquerque Acres — the same standards apply on every single job we take.

abqconcrete.com  |  (505) 550-0418  |  Serving Albuquerque, Rio Rancho, Santa Fe, Los Lunas, Edgewood, Corrales, Placitas, North Albuquerque Acres & all of Central New Mexico